Molten silicon micro powder introduces the application fields of silicon micro powder to everyone

Commercial concrete, high-strength concrete, self leveling concrete, amorphous refractory materials, dry mixed (pre mixed) mortar, high-strength non shrinkage grouting material, wear-resistant industrial flooring, repair mortar, polymer mortar, insulation mortar, impermeable concrete, concrete compactor, concrete preservative, cement-based polymer waterproofing agent; Reinforcement of rubber, plastic, unsaturated polyester, paint, coatings, and other polymer materials, modification of ceramic products, and so on.

1. Used in mortar and concrete:

High rise buildings, harbor docks, reservoir dams, water conservancy, culverts, railways, highways, bridges, subways, tunnels, airport runways, concrete pavements, and coal mine roadway anchoring and spraying reinforcement.

2. In the materials industry:

(1) High end high-performance low cement refractory castables and prefabricated components have a service life three times that of ordinary castables, with a fire resistance increase of about 100 ℃, and significant improvements in high-temperature strength and thermal shock resistance. It has been widely used in industries such as coke ovens, ironmaking, steelmaking, steel rolling, non-ferrous metals, glass, ceramics, and power generation.

(2) Large scale iron trenches and steel ladle materials, breathable bricks, application and repair materials, etc.

(3) Application of self flowing refractory pouring materials and dry wet spraying construction.

(4) Oxide bonded silicon carbide products (ceramic kiln furniture, flame plates, etc.).

(5) High temperature calcium silicate lightweight insulation material.

(6) Corundum mullite push plates are used for electric porcelain kilns.

(7) High temperature wear-resistant materials and products.

(8) Corundum and ceramic products.

(9) Sailong combination products.

At present, in addition to being widely used in casting refractory materials, it has also been widely applied in electric melting and sintering refractory materials.

3. New wall materials and decorative materials:

(1) Polymer mortar, insulation mortar, and interface agent are used for wall insulation.

(2) Cement based polymer waterproof material.

(3) Lightweight aggregate insulation energy-saving concrete and products.

(4) Processing of putty powder for interior and exterior wall construction.

4. Other uses:

(1) Raw materials for silicate bricks.

(2) Produce water glass.

(3) Used as a reinforcing material for organic compounds. Because its composition is similar to that of white carbon black produced by gas-phase method. It can be used as a filling and reinforcing material in polymer materials such as rubber, resin, coatings, paints, and unsaturated polyester.

(4) Used as an anti caking agent in the fertilizer industry.